nrw contec screen systems
Reliable screen systems for waste water treatment or treatment of process water or cooling water.
Municipal wastewater treatment plant Sludge screening
Fine Screening Membrane clarification plant
Small decentralised sewage treatment plant
Industrial wastewater treatment plant
A screen system as you want it
Effective & economical
A brilliant result in every respect: a nrw contec screen reliably removes floating matter, sediment, suspended matter and fibrous matter. Extremely low-maintenance, it also requires little cleaning water and energy.
Numerous wastewater treatment plant operators and industrial companies trust the stable, long-lasting contec screen.
Permanently working
- High degree of separation of screenings
- Low space requirement
- Little cleaning water
- Extremely low maintenance
- Designed for high durability
- Economical thanks to low drive power.
- Low-wear
Cleaner & conditioner
Areas of application wastewater treatment plant
- Mechanical wastewater treatment
- Pre-cleaning for membrane sewage treatment plants
Fields of application
- Industrial waste water treatment
- Treatment of process or cooling water
Function: simple
- The waste water reaches the semicircular perforated screen plate, which retains screenings.
- The screenings are conveyed by brushes into the lateral screenings discharge.
- The cleaned water flows freely downwards from the perforated screen.
- A simple process for an exceptionally high degree of separation.
Basic equipment of the nrw contec screening system:
Sophisticated, robust and durable
nrw contec screen with explosion-proof motors in tough use
RBS twin combi screen system in special design for the chemical industry
Drive: Made in Germany
The brush cross in a nrw contec screen copes very well with only approx. 2 rpm. Driven by energy-efficient and highly reliable gear motors made in Germany.
Variable: Cleaning brushes
The polypropylene brushes used in the screen achieve a service life of several years. Due to their length and arrangement, they are extremely resistant even to abrasive Screenings.
To compensate for wear, you can simply readjust the brushes. In normal operation, the brushes achieve service lives of several years.
Safe: Cover
Smaller systems are equipped with a hood.
Larger units have a hood, door and protective grille.
Options for the nrw contec screening system
screen with emergency overflow pipe
Lower tub with two drains
Infeed
The Infeed of the nrw contec screening system is located on a front side. In the standard system you can choose
- from Infeed different sizes according to DIN or ANSI standard,
- from special constructions according to your requirements.
Outlet
Every drain installation is different. nrw contec screening systems adapt.
How the purified water runs
- freely downwards into a tank/ container,
- via an open channel into downstream plant components,
- into a catch basin with connected piping to downstream plant components.
Screen perforation
Select the screen that matches the screenings ...
- Ultra-fine screen: opening 0.8 - 2 mm
- Fine screen: opening 2 - 4 mm
- Coarse screen: opening 4 - 16 mm
Material
- Stainless steel 1.4301
- Stainless steel 1.4571
- Special materials, for example 1.4462 Duplex (extremely corrosion-resistant)
Emergency overflow
If, for any reason, a nrw contec screen should experience a hydraulic overload, it is protected by
- an overflow pipe.
For example, if the screen is installed to protect an MBR system.
- a box as a bypass.
An overflow that allows wastewater to pass through the screen untreated in the event of an overload.
Accessories for the nrw contec screening system
screen with screenings chute
Screen with integrated screenings press
Discharge via screening chute
The simplest ejection solution.
Via the screenings chute, the solids are discharged directly into a container.
The chute in the form of a flat channel can be open, covered or equipped with heating.
Discharge via screenings conveyor
For the removal of separated screenings.
A screenings conveyor (spiral conveyor / screw conveyor) installed at the screenings discharge conveys the screenings horizontally/sideways.
Screenings press discharge
For weight and volume reduction of the screenings.
The screenings press is installed directly at the screenings discharge.
The screenings press or "screw press" conveys the separated screenings laterally into the pressing zone by means of an integrated screw conveyor. A counterpressure is generated in the pressing zone. In this way, the soft, waterlogged screenings are wrung out and compacted.
While the water drains off through a perforated screen in the pressing zone, the pressed screenings push out like a sausage.
Discharge via a screenings washing press
For the removal of still adhering faecal residues.
Similar to the screenings press, the screenings washing press is installed directly on the nrw contec screen. Or it is at the end of a screenings conveyor.
The screenings washing press also presses the water out of the screenings. In addition, however, it washes out the screenings. This is done via forward and reverse rotations, while wash water is injected via additional solenoid valves.
This washes away most of the adhering fecal matter. And flow back via a pipeline into the inlet shaft through which the screen is fed.
Sagging devices
For hygienic collection and storage of the separated screenings.
Undesirable: Odour nuisance due to unpleasant smells or vermin "hatching" in the screenings.
A sagging device provides a remedy here. This also discourages animals from searching for food in screenings and spreading it over a large area.
Heating system
For winter operation
Controlled heating system for winter operation in various heating capacities.
Drainage sump
With outlet flange according to DIN or ANSI.
Cleaning system
For cleaning the back of the perforated screen plates.
Elevation
Underframes for adaptation to special installation conditions.
Warning system
Detection via sensor in emergency overflow.
Screenings container
Container with or without drainage.
Exhaust pipe
With flange according to DIN/ANSI for the extraction of unpleasant odours.
Electrical controls
Control incl. safety devices as standard or according to your specification.
Lubrication equipment
Manual or automatic lubrication devices for the shaft bearings.
More details about the nrw contec screen?
Write to us
By sending this message you agree to our privacy policy.
We respond immediately.
Please write to us if you would like more information or have any questions. We look forward to hearing from you.
Stefan Fischer and Daniel Durain